ABB ACS280, Руководство по прошивке, Страница: 277 / 430

Parameters 277
96.55 Checksum control word
Bits 8…9 select which comparison(s) are made:
• Bit 8 = 1 (Approved checksum A):
96.68 Actual
checksum A is compared to 96.71 Approved
checksum A
, and/or
• Bit 9 = 1 (Approved checksum A): if
96.69 Actual
checksum B is compared to 96.72 Approved
checksum B
.
Bits 12…13 select approved (reference) checksum
parameter(s) into which the actual checksum(s) from
parameter(s) are copied:
• Bit 12 = 1 (Set approved checksum A): Value of
96.68 Actual checksum A
is copied into
96.71
Approved checksum A
and/or
• Bit 13 = 1 (Set approved checksum B): Value of
96.69 Actual checksum B
copied into
96.72
Approved checksum B
.
0b0000
0b0000...0b1111 Checksum control word. 1 = 1
96.68 Actual checksum A
Displays the actual parameter configuration
checksum A. The checksum A is generated and
updated whenever an action is selected in
96.54
Checksum action
and
96.55 Checksum control word
,
bit 8 = 1 (Approved checksum A)
The set of parameters for checksum A calculation
does not include fieldbus settings parameters.
The parameters included in the checksum A
calculation are user editable parameters in parameter
groups 10, 15, 19, 20, 21, 22, 23, 24, 25, 28, 30, 31, 32, 35,
36, 37, 40, 41, 45, 46, 71, 95, 96, 97, 98, and 99.
See also section
Parameter checksum calculation
(page
84
).
0x0000
0x0000...0xffff Actual checksum A. 1 = 1
No. Name/Value Description Default
FbEq 16
Bit Name Information
0...7 Reserved
8 Approved checksum A 1 = Enabled: Checksum A ( 96.71 ) is observed. 0 =
Disabled.
9 Approved checksum B 1 = Enabled: Checksum B (
96.72
) is observed. 0 =
Disabled.
10...11 Reserved
12 Set approved checksum
A
1 = Set: Copy value of
96.68
into
96.71
. 0 = Done (copy
has
been made).
13 Set approved checksum
B
1 = Set: Copy value of
96.69
into
96.72
. 0 = Done (copy
has
been made).
14...15 Reserved