ABB ACS 800 Series, Инструкция по применению

Страница: 32 / 44

Actual signals and parameters in ACS800 Standard Application Program
32
Parameters
The table below lists the parameters and parameters values that are essential for the
Adaptive Program. The abbreviation FbEq stands for fieldbus equivalent.
Index Parameter name /
value
Description FbEq
10 START/STOP/DIR Parameters through which the Adaptive Program can control the start, stop
and direction of the drive.
10.01 EXT1 STRT/STP/DIR
PARAM 10.04 Source selected by 10.04 17
10.02 EXT2 STRT/STP/DIR
PARAM 10.05 Source selected by 10.05 . 17
10.04 EXT 1 STRT PTR Selects the source for parameter 10.01 .
-255.255.31 …
+255.255.31 / C.-32768
… C.32767 Parameter pointer or constant value:
- Parameter pointer: Inversion, group, index and bit fields. The bit number is
effective only for blocks handling boolean inputs.
- Constant value: Inversion and constant fields. The inversion field must have
value C to enable the setting of the constant.
10.05 EXT 2 STRT PTR Selects the source for 10.02 .
-255.255.31 …
+255.255.31 / C.-32768
… C.32767 Parameter pointer or constant value. See Parameter 10.04.
11 REFERENCE SELECT Parameters through which the Adaptive Program can control the reference of
the drive.
11.02 EXT1/EXT2 SELECT
PARAM 11.09 Source selected by 11.09 . 16
11.03 EXT REF1 SELECT
PARAM 11.10 Source selected by 11.10 . 37
11.06 EXT REF2 SELECT
PARAM 11.11 Source selected by 11.11 . 38
11.09 EXT 1/2 SEL PTR Selects the source for 11.02 .
-255.255.31 …
+255.255.31 / C.-32768
… C.32767 Parameter pointer or constant value. See Parameter 10.04.
11.10 EXT 1 REF PTR Selects the source for 11.03 .
-255.255.31 …
+255.255.31 / C.-32768
… C.32767 Parameter pointer or constant value. See Parameter 10.04.
11.11 EXT 2 REF PTR Selects the source for 11.06 .
-255.255.31 …
+255.255.31 / C.-32768
… C.32767 Parameter pointer or constant value. See Parameter 10.04.
14 RELAY OUTPUTS Parameters through which the Adaptive Program can control the relay
outputs of the drive.
14.01 RELAY RO1 OUTPUT
PARAM 14.16 Source selected by parameter 14.16 . 36
14.02 RELAY RO2 OUTPUT