ABB ACQ80, Руководство по прошивке

Страница: 98 / 390

98 Parameters
06.19 Speed control
status word
Speed control status word.
This parameter is read-only. 0b0000
0b0000...0b1111 Speed control status word. 1 = 1
06.29 MSW bit 10
selection
Selects a binary source whose status is
transmitted as bit 10 (User bit 0) of
06.11 Main
status word
.
Above limit
False 0 0
True 1 1
Above limit Bit 10 of
06.17 Drive status word 2
(see page
96
). 2
Other [bit]
Source selection (see
Terms and abbreviations
on
page
80
).
06.30 MSW bit 11
selection
Selects a binary source whose status is
transmitted as bit 11 (User bit 0) of
06.11 Main
status word
.
Ext ctrl loc
False 0 0
True 1 1
Ext ctrl loc Bit 11 of
06.01 Main control word
(see page
95
). 2
Other [bit]
Source selection (see
Terms and abbreviations
on
page
80
).
-
06.31 MSW bit 12
selection
Selects a binary source whose status is
transmitted as bit 12 (User bit 1) of
06.11 Main
status word
.
Ext run
enable
False 0. 0
True 1. 1
Ext run enable Status of the external run enable signal. 2
Other [bit]
Source selection (see
Terms and abbreviations
on
page
80
).
-
No. Name/Value Description Def/
FbEq16
Bit Name Description
0 Zero speed Drive has been running below zero speed
limit (30.00 rpm).
1 Forward 1 = Drive is running in forward direction
above zero speed limit.
2 Reverse 1 = Drive is running in reverse direction
above zero speed limit.
3…6 Reserved
7 Any constant speed request Not applicable.
8…15 Reserved