ABB ACQ80, Руководство по прошивке

Страница: 159 / 390

Parameters 159
32.26 Supervision 3
action
Selects whether the drive generates a fault,
warning or neither when the value monitored by
signal supervision 3 exceeds its limits.
Note: This parameter does not affect the status
indicated by
32.01 Supervision status
.
No action
No action No warning or fault generated. 0
Warning Warning
A8B2 Signal supervision 3
is generated. 1
Fault Drive trips on fault
80B2 Signal supervision 3
. 2
Fault if running If running, the drive trips on fault
80B0 Signal
supervision 1
.
3
32.27 Supervision 3
signal
Selects the signal to be monitored by signal
supervision function 3.
For the available selections, see parameter
32.07
Supervision 1 signal
.
Torque
32.28 Supervision 3
filter time
Defines a filter time constant for the signal
monitored by signal supervision 3. 0.000 s
0.000 …
30.000 s
Signal filter time. 1000 = 1 s
32.29 Supervision 3
low
Defines the lower limit for signal supervision 3. 0.00
-21474836.00…
21474836.00 Low limit. -
32.30 Supervision 3
high
Defines the upper limit for signal supervision 3. 0.00
-21474836.00…
21474836.00 Upper limit. -
32.31 Supervision 3
hysteresis
Defines the hysteresis for the signal monitored
by signal supervision 3. 0.00
0.00…
100000.00 Hysteresis. -
32.35 Supervision 4
function
Selects the mode of signal supervision
function 4.
Determines how the monitored signal (see
parameter
32.37
) is compared to its lower and
upper limits (
32.39
and
32.30
respectively). The
action to be taken when the condition is fulfilled
is selected by
32.36
.
Disabled
Disabled Signal supervision 4 not in use. 0
Low Action is taken whenever signal is below
Supervision low limit - (0.5 * hysteresis). Action is
deactivated whenever signal is above
Supervision low limit + (0.5 * hysteresis).
1
No. Name/Value Description Def/
FbEq16