ABB ACQ80, Руководство по прошивке

Страница: 108 / 390

108 Parameters
11.44 Freq in 1 at
scaled min
Defines the value that is required to correspond
internally to the minimum input frequency
defined by parameter
11.42 Freq in 1 min
. See
diagram at parameter
11.42 Freq in 1 min
.
0.000
-32768.000…
32767.000 Value corresponding to minimum of frequency
input 1. 1 = 1
11.45 Freq in 1 at
scaled max
Defines the value that is required to correspond
internally to the maximum input frequency
defined by parameter
11.43 Freq in 1 max
. See
diagram at parameter
11.42 Freq in 1 min
.
50.000
-32768.000…
32767.000 Value corresponding to maximum of frequency
input 1. 1 = 1
12
12 Standard AI
Configuration of standard analog inputs.
12.02 AI force selection
The true readings of the analog inputs can be
overridden for eg. testing purposes. A forced
value parameter is provided for each analog
input, and its value is applied whenever the
corresponding bit in this parameter is 1.
Note: AI filter times (parameters
12.16 AI1 filter
time
and
12.26 AI2 filter time
) have no effect on
forced AI values (parameters
12.13 AI1 forced
value
and
12.23 AI2 forced value
).
Note: Boot and power cycle reset the force
selections (parameters
12.02
and
12.03
).
0b0000
0b000...0b1111 Forced values selector for analog inputs AI1 and
AI2. 1 = 1
12.03 AI supervision
function
Selects how the drive reacts when an analog
input signal moves out of the minimum and/or
maximum limits specified for the input.
The inputs and the limits to be observed are
selected by parameter
12.04 AI supervision
selection
.
No action
No action No action taken. 0
Fault Drive trips on
80A0 AI supervision
. 1
Warning Drive generates an
A8A0 AI supervision
warning. 2
No. Name/Value Description Def/
FbEq16
Bit Value
0 1 = Force AI1 to value of parameter
12.13 AI1 forced value
.
1 1 = Force AI2 to value of parameter
12.23 AI2 forced value
.
2…15 Reserved