ABB ACQ80, Руководство по прошивке

Страница: 101 / 390

Parameters 101
10.03 DI force selection
The electrical statuses of the digital inputs can
be overridden for eg. testing purposes. A bit in
parameter
10.04 DI forced data
is provided for
each digital input, and its value is applied
whenever the corresponding bit in this
parameter is 1.
Note: Boot and power cycle reset the force
selections (parameters
10.03
and
10.04
).
0b0000
0b0000...0b1111 Override selection for digital inputs. 1 = 1
10.04 DI forced data
Allows the data value of a forced digital input to
be changed from 0 to 1. It is only possible to
force an input that has been selected in
parameter
10.03 DI force selection
.
Bit 0 is the forced value for DI1; bit 5 is the forced
value for the DI6.
0b0000
0b0000...0b1111 Forced values of digital inputs. 1 = 1
No. Name/Value Description Def/
FbEq16
Bit Value
0 1 = Force DI1 to value of bit 0 of parameter
10.04 DI forced data
.
(0 = Normal mode)
1 1 = Force DI2 to value of bit 1 of parameter
10.04 DI forced data
.
(0 = Normal mode)
2 1 = Force DI3 to value of bit 2 of parameter
10.04 DI forced data
.
(0 = Normal mode)
3 1 = Force DI4 to value of bit 3 of parameter
10.04 DI forced data
.
(0 = Normal mode)
4 1 = Force DI5 to value of bit 4 of parameter
10.04 DI forced data
.
(0 = Normal mode)
5 1 = Force DI6 to value of bit 5 of parameter
10.04 DI forced data
.
(0 = Normal mode)
6…15 Reserved
Bit Value
0 Force the value of this bit to D1, if so defined in parameter
10.03 DI
force selection
.
1 Force the value of this bit to D3, if so defined in parameter
10.03 DI
force selection
.
2 Force the value of this bit to D3, if so defined in parameter
10.03 DI
force selection
.
3 Force the value of this bit to D4, if so defined in parameter
10.03 DI
force selection
.
4 Force the value of this bit to D5, if so defined in parameter
10.03 DI
force selection
.
5 Force the value of this bit to D6, if so defined in parameter
10.03 DI
force selection
.
6…15 Reserved