Parameters 105
Previous hour energy consumption. The value
is stored here when its values has been cumulated
for 60 minutes.
If the power is cycled, after the drive is again up and running,
the parameter value is set to the value it had before the power
cycle.
-
0.00… 1000000.00
kWh
Energy.
1 = 1 kWh
Current day energy consumption. This is the energy of the
last 24 hours (not necessarily continuous) the drive has been
running, not the energy of a calendar day. T
If the power is cycled, after the drive is again up and running,
the parameter value is set to the value it had before the power
cycle.
-
0.00… 1000000.00
kWh
Energy.
1 = 1 kWh
Previous day energy consumption. The value
is stored here when its value has been cumulated
for 24 hours.
If the power is cycled, after the drive is again up and running,
the parameter value is set to the value it had before the power
cycle.
-
0.00… 1000000.00
kWh
Energy.
1 = 1 kWh
Amount of energy that has passed through the drive (in either
direction) in full kilowatt-hours. The minimum value is zero.
-
-200000000.0…
200000000.0 kWh
Energy in kWh.
10 = 1 kWh
Inverter GWh
counter (resettable)
Amount of energy that has passed through the drive (in either
direction) in full gigawatt-hours. The minimum value is zero.
You can reset the value by setting it to zero. Resetting any of
parameters
…
resets all of them.
-
0…65535 GWh
Energy in GWh.
1 = 1 GWh
Inverter MWh
counter (resettable)
Amount of energy that has passed through the drive (in either
direction) in full megawatt-hours. Whenever the counter rolls
over,
Inverter GWh counter (resettable)
is incremented.
The minimum value is zero.
You can reset the value by setting it to zero. Resetting any of
parameters
…
resets all of them.
-
0…1000 MWh
Energy in MWh.
1 = 1 MWh
Inverter kWh
counter (resettable)
Amount of energy that has passed through the drive (in either
direction) in full kilowatt-hours. Whenever the counter rolls
over,
Inverter MWh counter (resettable)
is incremented.
The minimum value is zero.
You can reset the value by setting it to zero. Resetting any of
parameters
…
resets all of them.
-
0…1000 kWh
Energy in kWh.
10 = 1 kWh
Cumulative inverter
energy (resettable)
Amount of energy that has passed through the drive (in either
direction) in full kilowatt-hours. The minimum value is zero.
You can reset the value by setting it to zero. Resetting any of
parameters
…
resets all of them.
-
-200000000.0…
200000000.0 kWh
Energy in kWh.
10 = 1 kWh
No.
Name/Value
Description
Def/FbEq16
Содержание ACQ580
