ABB ACQ580, Быстрый старт

Страница: 7 / 70

EN – Quick start-up guide 7
R0-
R4
EN
DE
ES
FR
IT
RU
SV
3 – Hand/Off/Auto operation
The drive can be used in following modes: Auto,
Off, Hand
Auto mode – Drive is controlled
remotely from the
I/O or the fieldbus.
Off mode – Drive is controlled
locally from the
control panel. This mode indicates that drive is
stopped.
Hand mode – Drive is controlled
locally from the
control panel. This mode indicates that drive is
running. With this mode, the initial reference is
copied from the drive reference.
symbol on the top row indicates that you can
change the reference with
and .
The following diagram shows the state transitions
when you press the
Auto , Off or Hand button:
Drive generates the Fault 7081 Control panel
loss if the panel was disconnected from the drive
for more than the communication loss time
defined in the drive (parameter
49.04) .
If panel is not connected to the drive, reset signal
should come from I/O or fieldbus, or by
reconnecting the panel.
When panel is reconnected, press
( Reset )
to reset the fault.
Auto
Off
Hand