ABB Ability 800xA Series, Руководство пользователя

Страница: 33 / 122

Section 3 Configuration Remote Access Server Advanced Configuration
3BSE037076-510 D 33
• Port number to use for the connection
• Usage of encryption for the connection
To configure port number and encryption usage for a connection, select the Service
Structure and select the object Services/Remote Access Server/Basic, Service
Group. Select the Service Group Definition aspect and the Special Configuration
tab.
To specify the port number to use, enter the port number in the
Port to use
field.
Default port is 3340.
Ensure the port selected is free to use. Consult your network responsible for
information.
It is possible to encrypt all messages between the Remote Access Server and the
Remote Access Client if a password is set. Checking the
Encrypt traffic
check box
specifies that encryption will be used. Encryption makes it more difficult to act as a
Figure 13. Remote Access Service, Special Configuration Tab
If the Remote Access Server is protected by a firewall, make sure the selected
port is open in the firewall.