ABB A43, Руководство пользователя

Страница: 136 / 295

Communication with Modbus
A43/A44 136
2CMC48001M0201
User Manual Revision: C
9.8 Event logs
Mapping table
Header and data
block
Note
–
Before you can use the information in this chapter you must be familiar with
and understand the information and the concepts described in
“Historical Data” on
page - 114.
The following table shows an overview of the mapping table:
Log type Details Start Reg (Hex) Size
System log Header 6500 16
System log Data block 6510 105
Event log Header 65B0 16
Event log Data block 65C0 105
Net quality log Header 6710 16
Net quality log Data block 6720 105
There is one pair of header and data block for each log type, located in the
registers listed in the mapping table above. In the tables showing the structure
of the header and data block below the register numbers are valid for the
System log. However the headers and data blocks for all log types share the
same structure, so the tables are applicable for all log types if the register
numbers are exchanged to correct values.
Structure of
the header
The following table describes the header:
Function Start Size Description Read/write
Reg
(Hex)
Get next block 6500 1 Write value 1 to this register to load R/W
the next block of log entries
Entry number 6501 1 Write to this register to choose an R/W
entry number to start reading from
Date/Time 6504 3 Write to this register to choose a R/W
date/time to start reading from
Direction 6507 1 Write to this register to choose the R/W
direction of reading