![background image](http://html.mh-extra.com/html/abb/615-series-ansi/615-series-ansi_technical-manual_4665553.webp)
Section 8
1MAC050144-MB C
Measurement functions
546
615 series ANSI
Technical Manual
8.2.0.4
Settings
Table 450: IA,IB,IC Non group settings
Parameter
Values (Range) Unit Step Default
Description
Operation
1=Enable
5=Disable
1=Enable
Operation Off / On
Measurement mode
1=RMS
2=DFT
2=DFT
Selects used measurement mode
Num of phases
1=1 out of 3
2=2 out of 3
3=3 out of 3
1=1 out of 3
Number of phases required by limit supervision
Demand interval
0=1 minute
1=5 minutes
2=10 minutes
3=15 minutes
4=30 minutes
5=60 minutes
6=180 minutes
0=1 minute
Time interval for demand calculation
A high high limit
0.00...40.00
xIn
1.40
High alarm current limit
A high limit
0.00...40.00
xIn
1.20
High warning current limit
A low limit
0.00...40.00
xIn
0.00
Low warning current limit
A low low limit
0.00...40.00
xIn
0.00
Low alarm current limit
A deadband
100...100000
2500
Deadband configuration value for integral calculation. (percentage of
difference between min and max as 0,001 % s)
Содержание 615 Series ANSI
