ABB 2CSYD0201B, Руководство по установке, Страница: 4 / 16

IT
4
2CSYD0201B
3 INSTALLATION
The installation procedure encompasses the following steps:
1) Device fixing.
2) Programming
3) Adjustment.
4) Completion and test.
3.1 Device fixing
INSTRUCTIONS RELEVANT TO POSITIONING
The device can be installed on a wall or on a pole, far from electromagnetic sources
(e.g. electricity meters, electric engines).
The detector shall be installed:
1) between 80 and 120 cm above the ground level (standard height 1 meter);
2) in a vertical position, otherwise its reliability will be lower;
3) in a way that the access is crosswise and not radial to the detector itself;
4) by avoiding to direct IR sensors towards moving objects (e.g. swaying
trees, bushes, flags, clothes hanging, etc.);
5) by avoiding to direct IR sensors towards reflecting objects (e.g. puddles,
windows, etc.).
6) Figure 1 graphically summarizes the above-mentioned indications.
Figure 1