Abarth 2014 500, Руководство пользователя

Страница: 51 / 211

BONNET
OPENING
Proceed as follows:
❒
pull lever A fig. 54 in the direction
indicated by the arrow;
❒
move the lever B fig. 55 to the right
as shown in the figure;
❒
lift the bonnet and, at the same time,
release the supporting rod C fig. 56
from its catch D, then insert the
end of the rod into housing E in the
bonnet (larger hole) and push to
safety position (smaller hole),
as shown in the figure.
25) 26) 27)
10)
CLOSING
Proceed as follows:
❒
hold the bonnet up with one hand
and with the other remove rod C
fig. 56 from housing E and fit it back
into its catch D
❒
lower the bonnet to approximately 20
centimetres above the engine
compartment and let it come down.
Make sure that the bonnet is
completely closed and not just
secured in safety position. If it is not
perfectly closed, do not try to press
the bonnet down but open it and
repeat the procedure.
28)
WARNING
25) Incorrect positioning of the
supporting rod may cause the
bonnet to drop suddenly. Only
perform these operations when
the car is stationary.
26) When the engine is warm, work
carefully inside the engine
compartment to avoid getting
burnt. Do not place your hands
near the engine fan as it may be
activated even when the key is
removed. Wait for the engine
to cool down.
54
AB0A0051
55
AB0A0052
56
AB0A0053
47