Side Wall Pre-install Plumbing
Figure 3.0
When fitted against a side wall, all pipework connections to the bath should be made through
the foot side panel (tap end).
(figure 3.0).
This will provide the neatest solution for side wall installation.
Waste outlet and water feed connections will exit the panel as shown in figure 3.0 when
installed correctly.
Tap end of bath
– Plumbing connections
Note: for right handed bath plumbing
connectors will be mirrored to
opposite side of the bath foot.
5
Left hand bath tap end shown shown
Figure 4.0
Waste feed:
Ensure that of the 3 water
Pipes which come through the wall/floor,
The waste pipe is the closest to the
‘bath plumbing connections’ (figure 4.0).
Hot & Cold water feeds:
Notice the position of the hot
and cold pipes entering the bath in
figure 4.0.
This orientation will be mirrored for a
right hand bath, with cold water pipe
being closest to the bath foot plate.
Gemini 2000 Installation Manual v1.3
