Publication No. 597-0000000013-000 Rev. F
Compliance 23
A.2 Optical/Laser Device Notice
For optical/laser devices read the following note, caution, and warnings:
WARNING
For this product, use only the Class 1 laser devices that have the following approval:
–
FDA21 CFR 1040.10
–
IEC 60825-1
NOTE
Protect optical devices by inserting clean dust plugs into the device after the cables are extracted from
them. Be sure to clean the optic surfaces of the fiber cables before plugging the dust plugs back into the
optical bores of another optical device. Avoid getting dust and other contaminants into the optical bores of
your device. The optics will not work correctly when obstructed with dust.
CAUTION
It is important to disconnect or remove all cables before removing or installing an optical transceiver.
Failure to do so may result in damage to the cable or device.
WARNING
An optical transmitter is a Class 1 device. Invisible laser radiation may be emitted from disconnected fibers
or connectors. Do not stare into beams or view directly with optical instruments as this may permanently
damage your eyes.
Do not leave an optical transceiver uncovered except when inserting or removing a cable. The safety/dust
plugs keep the port clean and prevent accidental exposure to laser light.
