ABACO MACHINES SVL100, Руководство по эксплуатации, Страница: 37 / 44

32
V. TECHNICAL PROBLEMS & SOLUTIONS:
No.
Cause
Solution Image
1 Loose suction
cups Suction cups
have dust or
damaged Clean the suction
cups or replace
with a new one.
2 The vacuum
pressure
gauge
indication is
not between
-70 and -80
kPa
Damaged
pipes, air
leakage in
tubes and
valves
Inspect the
piping by using
diluted neutral
soapy water to
find suspected
leaks. Then
repair or replace
the tube or
device.
Pneumatic
cylinder slips
while lifting
and adjusting
the angle.
Inspect the
piping by using
diluted neutral
soapy water to
find suspected
leaks. Then
repair or replace
the tube or
device.
- Damaged
pipes, air
leaks in pipes
and valves
- Air pressure
is less than 6
bar.
3
Technical
problem
4
Difficult to
rotate the
stone slab 90
o
(the loading
is within the
W.L.L)
The rotary
joint is rusted Clean the rust
oil, grease into
the joint.
5
The handle is
difficult to
pull out Dust and/ or
rust Clean and
lubricate