AB Sciex QTRAP 4500 LC/MS/MS system, Руководство пользователя системы, Страница: 98 / 138

Operating Instructions — Analyze and Process Quantitative Data
4500 Series of Instruments System User Guide
98 of 138 RUO-IDV-05-0264-A
8. Click Next .
The Create Quantitation Set - Select Method page opens.
9. Click Choose Existing Method .
10. In the Method list, select PK Data_Mix.qmf .
11. Click Finish .
The Results Table opens.
12. Save the Results Table.
Create a Standard Query
A query and a standard query can be created numerous ways. The following is one example. For
more information about creating queries, refer to the Help.
It is recommended that the user validate any queries that are used to analyze data in a Results
Table.
1. In the navigation bar, under Quantitate , double-click Quantitation Wizard .
2. In the Create Quantitation Set - Select Samples page, select samples.
3. Click Next .
4. In the Select Settings & Query page, in the Default Query section, select Create
New Standard Query .
5. Type a query name.
Note: To create a query at the same time, refer to Create a Standard
Query on page 98 .
Tip! To add or remove samples in the Results Table, click Tools >
Results Table > Add/Remove Samples .
Tip! You can create well-formatted reports from a Results Table using the
Reporter software. It is recommended that the user validate the results if a
Reporter template that contains a query is used. Refer to the Reporter
chapter.