32
Manual configuration of DiSEqC 1.2 motor
(Menu – Setup – Service Searching – Positioner setup)
This setting is used only for
DiSEqC motors without USALS system.
Service searching
(Menu – Setup – Service Searching – Default services lists)
This menu enables installation of basic (default) setting for basic satellites (Astra 28,2E, Astra
19,2E, Astra 23,5E and HotBird 13E) – same way like during initial configuration.
Warning!
Actual setting in your receiver will be removed during Default setting installation!
If you need setting for more satellites you can install it as a plugin:
Plugins
(Menu – Plugins – Download Plugins)
Press GREEN function button „Download
Plugins“.
Wait until downloading catalogue of plugins
from the Internet.
Select Settings item and press OK.
Tuner is set for DiSEqC 1,2 ,
USALS is
turned off
and satellites to be aimed with
motor are selected.
„Tune“
– press Red function button to
display menu for entering satellite and TP to
be searched. Press OK for return to setup
menu.
You have to set up corresponding
transponder for every satellite and save its
position number.
Positioner movement
– use color function
buttons (according to description) to control
movement of the motor. Press the button
once to start movement, press it for the
second time to stop the movement..
Positioner fine movement
steb by steb
movement. Try to reach maximum value of
SNR parameter.
Positioner storage
– press Green function
button to save the position.
Set limits
– Setting up the east and west