ENGLISH
Note:
TV POWER, VOL+, VOL- are of TV universal
Switch to TV mode
1. Press and hold buttons "OK"+"MUTE" for 3s, the LED blink twice and turn off, RCU enter SET
UP mode.
2. Press V+ button, LED blink twice, now RCU is under TV mode.
Switch to STB mode
1. Press and hold buttons "OK"+"MUTE" for 3s, the LED blink twice and turn
off, RCU enter SET UP mode.
2. Press V- button, LED blink four times, now RCU is under STB mode.
Note: To unlock the device, restore factory Settings.
SETUP
1. Press and hold “POWER”and “OK” button for 3s until the indication LED
light on, then release the buttons.
2. Find the corresponding 4digitals from the brand code list, and press
thedigital button on the RCU one by one, the indication LED will blink one
time when press the button, after entered 4 digital buttons, LED will turn
off and indicate SET UP successfully.
Note:
1) If pressed wrong digital button, LED will blink twice and turn off, RCU will
exit SET UP mode.
2) After entered SET UP mode, if no operation within 30s, LED will blink
twice and turn off, RCU will exit SET UP mode automatically.
3) After entered SET UP mode, only when press digital buttons 0-9 and
EXIT button that the TV will responds, other buttons won’t send any code.
Manual SETUP
1. Press and hold “POWER”and “OK” button for 3s until the indication LED
light on, then release the buttons.
2. Press button CH+ or CH- to search code, until there’s responds from TV.
3.During searching, press button V+/V-/TV power can check if RCU can work with TV.
4.When there’s responds from TV, press OK button to save code, LED light off and RCU exit
search mode.
Note:
1) After entered SEARCH mode, if no operation within 30s, LED will blink twice and turn off, RCU
will exit SET UP mode automatically.
2) During searching ,only when press buttons CH+/CH-/OK/TV POWER/V+/V-/EXIT/EPG that the
TV will responds, other buttons won’t send any code.
3) During searching, press EXIT button can exit search mode, the code won’t be saved, LED will
blink twice and turn off.
4
）
When finished searching all the codes, LED will blink twice and turn off, RCU will exit Search
mode without saving the code.
5
）
When making manual search, if there’s no operation within 6s, RCU will start auto search.
6
