IEEE 1394b FireWire 800 PCI Host Adapter
2
JP1: IEEE1394 Bus Power Selector
Settings
Use +12V from PCI Express Slot
(motherboard’s PCB) for 1394 Bus
Power
(default)
Use Auxiliary Power from J5 (in this
setting, please connect a power
split cable from power supply to J6
of the Card)
1.
Turn the system power OFF before installation!
2.
Use static electricity discharge precautions.
Remove possible static discharge potential from any objects that
the host adapter may come in contact with before installation.
This can be accomplished by touching a bare metal chassis rail
after you have turned off the power.
3.
Remove the chassis cover from your computer
4.
Locate an unused PCI Express slot (typically white or black,
smaller than PCI slot) and remove the corresponding slot cover
from computer chassis.
5.
Plug the IEEE 1394b PCI Express Host Adapter to the unused PCI
Express expansion slot and attached the bracket to the computer
chassis screw.
6.
Installing IEEE1394 cables
The IEEE 1394b host adapter has two external, one internal
IEEE1394b 9-pin and one 6-pin 1394a connectors. The cables can
be used as follows (they may not be included with this card):
1394 Connectors
Available 1394 Cables
9-pin 1394b connector
(J3,J4,J6)
9-pin to 9-pin
9-pin to 6-pin
9-pin to 4-pin
6-pin 1394a connector
6-pin to 6-pin
3. Installing the IEEE 1394b PCIe Host Adapter
A
UX
PCI
E
A
UX
PCI
E
