Getting Started
1. Connect the power cord to the ST200.
2. Connect the wall plug into the wall power source.
3. Switch the On/Off switch on the side of the projector to the “On” position. The
projector should turn on automatically. If the projector does not turn on automati-
cally with the On/Off switch to “On” position press the power button on the top of the
projector or press the power button on the remote control.
4
Powering ON the projector
Chapter 2
Standby Mode
1. Stand By Mode – To enter “stand by mode” press the power button on top of the
projector twice. This will put the projector into “stand by mode”. In “stand by mode”
the projector is idle but is able to be powered on with the remote control or “wake up
feature” (custom models only). “Stand by mode” consumes power even when the
projector is idle.
Note: The ST200 Projector battery does not charge when the projector is in
operation.
Powering OFF the projector
1. Switch the On/Off switch to “Off” to turn off the projector.
Содержание ST200
Страница 1: ...aaxa TECHNOLOGIES User Guide ...
