Getting Started
1. Connect the power cord to the LED Showtime 3D.
2. Connect the wall plug into the wall power source.
3. Press the button on the top of the projector or remote control to start the projec-
tor. The button’s LED light will light blue when the projector is on.
5
Powering ON the projector
Chapter 2
Powering OFF the projector
1. Press the button on the keypad or remote to put the projector in “Stand by mode”.
The optical engine should power off and the fan should stop spinning. The projector
can be turned on using the remote control. “Stand by mode” consumes a little bit of
power
2. To fully turn off the projector, press the button on top of the projector until the
power light turns red. Disconnect the power adapter from the power socket to fully
turn off the projector.
Power Socket