4
4. Tighten the
fixing
screw properly.
5. Insert the search coil cable plug into the
fi
ve pin jack on the
front control bo
x
’s housing.
6. Lengthen or shorten the stem, so when you stand upright
with the detector in your hand, the search coil is level with
and about 0.4~2inch above the ground. A
ft
er that,
tig
hten
the lock nut.
Caution:
The search coil cable plug
fi
ts into the connector only one
way. Do not force the plug, or you could damage it.
You don’t need to disassemble the stem lock nut. In case
you disassemble it carelessly, place the washer on the top
of the stem connected with the handle with the small head
of the washer upwards, and then hitch the stem lock nut
on the washer. Finally,
tig
hten it to lock it in place.
