AAVIX AGT1320, Руководство пользователя

Страница: 6 / 12

Cutting Height Adjustment
Adjusting the cutting height may bring you into
contact with the moving blade, causing serious injury.
• Stop the engine and wait for all the moving parts
to stop.
• Do not put your fingers under the housing when
adjusting the cutting height.
If the engine has been running, the muffler will be hot
and can severely burn you. Keep away from the hot
muffler.
Adjust the cutting height as desired. Set all four wheels
to the same height.
Note:
To raise the mower, move the cutting height
levers forward; to lower the mower, move them
towards the rear. (Figure 7)
1. Raise the Mower 2. Lower the Mower
Note:
5 position height adjustment. 1.75”-3.75”
Starting the Engine
1. Hold the blade control bar (Figure 8) against the
handle.
1. Hold blade control bar then pull the pull start to start
the mower. (Figure 9)
Note:
If the mower does not start after several attempts,
please contact your authorized service center.
Stopping the Engine
Service interval:
Before each use or daily.
To stop the engine, release the blade control bar (Figure 10)
Important:
When you release the blade control bar, both
the engine and the blade should stop within 3 seconds. If
they do not stop properly, stop using your mower
immediately and contact an authorized service center.
Figure 7
5