AAT V-MAX+, Перевод оригинального руководства пользователя

Страница: 19 / 36

Please check the wheelchair's anti-tilt support before each use. Please do
not drive backwards against a wall with mounted anti-tilt support because
they could jam and thus not function properly
.
When you use mass transportation such as bus, subway, tram, etc.) please
turn off the v-max
+
and use the locking brakes on your wheelchair .
Please cross streets, intersections and railway crossings paying extra at-
tention.
Please never cross rails (e.g. railway tracks) in a parallel way because the
wheels could be jammed.
If the v-max+ is turned off you cannot move the wheelchair manually any
more, i.e. the engine is blocked. However, there is one exception: due to
the mechanical locking mechanism of the engine’s sliders the v-max+ is
disengaged. Now you can move the wheelchair (see chapter 3.3). The bra-
ke effect is only there when the device is turned on.
F
The v-max+ can always be stopped - during regular use or in an emergen-
cy - by pushing and releasing of the panic switch. Further information on
the panic switch you find in chapter 6.1.3
F
In case of malfunction, please follow the instructions in chapter 6.5
Troubleshooting.
4.1.1 Environmental conditions, electro-magnetic compatibility
Electro-magnetic compatibility means that an electric device functions
properly in its electro-magnetic environment without influencing other de-
vices in the same environment
.
The v-max
+
successfully passed all the EMV tests required by law. Never-
theless, always check whether the device’s electronic functions work pro-
perly before each use. This is particularly important if there is an aerial
mast nearby.
F
Please note that the v-max
+
may interfere with other electronic devices’
sensitive electro-magnetic fields (e.g. anti-theft systems in department
stores). This may also happen if you connect other devices
.
Also make sure that the v-max
+
is not operated in close proximity to medi-
cal devices with a high potential for danger and/or life-supporting
functions as well as diagnostic devices
.
4.1.2 Climate
To ensure proper functioning it is not advisable to expose the v-max+ to
freezing conditions. Should this be unavoidable, always put the device in
a non-freezing environment for at least one hour before using it (see chap-
ter 2.3
)
At this point check the device before operation. Should your v-max
+
not
function properly, please call your local dealer or AAT directly .
Please note that the surface temperature of the v-max+ could be increased
due to the influence of external heat sources like sunlight.
4.2 Instruction
In the interest of your safety the v-max
+
may only be operated by people
instructed in the use of the device and further by people who are physical-
ly and mentally capable to manage the v-max
+
in all situations that may
occur while using it .
19