AAT S-max, Перевод оригинального руководства пользователя

Страница: 23 / 40

6.5.6 Remove the wheelchair’s wheels
To move the wheelchair with the s-max up- and downstairs you need to re-
move the wheelchair’s big wheels.
The wheels must be lifted approximately 1 cm off the floor. After mounting
the s-max to the wheelchair with the quick pins, if necessary, push the
UP/DOWN switch in direction UP until the device plus chair is lifted accor-
dingly by the climber.
1.
The axles of the wheelchair’s wheels are equipped with a quick re-
lease system. With your index finger push in the locking bolt in the
middle of the quick release system, which releases the connection to
the wheel so that the wheel can be removed.
2.
Please remove the wheelchair’s wheels one by one accordingly.
Finally pull in the climber entirely. At this point the wheelchair plus s-max is
ready to use.
6.5.7 Remove the s-max from the wheelchair
Push the UP/DOWN switch in direction UP (never DOWN) so that the climber
moves backward and downward in the direction of the user. Device plus
wheechair is lifted as soon as the climber touches the ground.
Release the UP/DOWN switch as soon as the wheelchair is lifted high enough
to mount the big wheels (this is already possible at 3/4 of the highest positi-
on - as you can see in the picture on the right).
Insert the wheels and employ the locking brakes.
Remove both quick pins from the upper brackets (remember pushing in the
locking bolts).
Now push the UP/DOWN switch, direction DOWN, pull in the climber entire-
ly and drive the s-max backwards away from the wheelchair. In case the
s-max ever gets caught at the lower bracket while driving backwards, push
the handle slightly down and forward, then try again.
23
S
-max