Wideo domofony Novus
–
Instrukcja obsługi
monitora ochrony NVE-GM200
Video intercom Novus
–
Installation manual guard monitor NVE-GM200
AAT SYSTEMY BEZPIECZEŃSTWA sp. z o.o.
Wszelkie prawa zastrzeżone
. All rights reserved
24
IMPORTANT SAFEGUARDS AND WARNINGS:
1.
Prior to undertaking any action please consult the following manual and read all the safety
and operating instructions before starting the device.
2.
Please keep this manual for the lifespan of the device in case referring to the contents of this
manual is necessary;
3.
All the safety precautions referred to in this manual should be strictly followed, as they have a
direct influence on user’s safety and durability and reli
ability of the device;
4.
All actions conducted by the servicemen and users must be accomplished in accordance with
the user’s manual;
5.
The device should be disconnected from power sources during maintenance procedures;
6.
Usage of additional devices and components neither provided nor recommended by the
producer is forbidden;
7.
Mounting the device on unstable surface or using not recommended mounts is forbidden.
8.
Improperly mounted device may cause a fatal accident or may be seriously damaged itself.
Device must be mounted by qualified personnel with proper authorization, in accordance
with this user’s manual;
9.
Device should be supplied only from a power sources whose parameters are in accordance
with those specified by the producer in the device’s technical datasheet
. Therefore, it is
forbidden to supply the device from a power sources with unknown parameters, unstable or
not meeting producer’s requirements;
10.
Signal and power cables should be placed in a way excluding the possibility of damaging them
by accident. Special attention must be paid to cables getting from the device and connecting
the power supply;
11.
Electric installation supplying the device should be designed to meet the specifications given
by the producer in such a way that overloading is impossible;
12.
User cannot repair or upgrade the equipment himself. All maintenance actions and repairs
should be conducted only by qualified service personnel;
13.
Unplug the device from the power source immediately and contact the proper maintenance
department when the following occurs:
•
Damages to the power cord or to the plug itself;
•
Liquids getting inside the device or exposure to strong mechanical shock;
•
Device behaves in a way not described in the manual and all adjustments
approved by the
•
manufacturer and possible to apply by user himself, seem not to have any effect;
•
Device is damaged;
•
Atypical behaviour of the device components may be seen (heard).
14.
In necessity of repairs attention to using only original replacement parts (with their
parameters in accordance with those specified by the producer) should be paid. Non-licensed
service and non-genuine replacement parts may cause fire or electrocution;
15.
After maintenance activities tests should be run to ensure proper operation of all the
functional components of the device.
