Aastra VentureIP 480i, Руководство пользователя

Страница: 30 / 60

New Features in 1.4.1
26 41-001024-00, Rev 09, Release 1.4.1
IP Phone Release Notes 1.4.1
How it works
When a startup, successful registration, incoming call, outgoing call,
offhook, or onhook call event occurs
on the phone, the phone checks to see if
the event has an action URI configured. If the phones finds a URI configured, any
variables configured (in the form $$VARIABLENAME$$) are replaced with the
value of the appropriate variable. After all of the variables are bound, the phone
executes a GET on the URI. The Action URI binds all variables and is not
dependant on the state of the phone.
For example, if you enter the following string for the
action uri outgoing
parameter:
action uri outgoing: http://10.50.10.140/
outgoing.pl?number=$$REMOTENUMBER$$
and you dial out the number 5551212, the phone executes a GET on:
http://10.50.10.140/outgoing.pl?number=5551212
You can configure this feature via the configuration files or the Aastra Web UI.
Configuring via the Configuration Files
You use the following parameters in the configuration files to configure the XML:
action URI.
Note:
If the phone can’t find the Action URI you specify, it returns a
“NULL” response. For example,
http://10.50.10.140/outgoing.pl?number=
Parameter –
action uri startup
Startup
(in Web UI)
Aastra Web UI Advanced Settings->Action URI
Configuration Files aastra.cfg, <mac>.cfg
Description Specifies the URI for which the phone executes a GET on when a startup
event occurs.
Format Fully qualified URI
Default Value Not Applicable
Range Up to 128 ASCII characters
Example action uri startup: http://10.50.10.140/startup