Aastra OpenCom 100, Руководство по монтажу и пусконаладке

Страница: 190 / 244

Team Functions Introduction
188
Note: Only one function or call number can be programmed
for each call key.
The following keys can be used:
■ Trunk key : Calls (for the programmed call number, e.g. 11) are signalled to this
key, and you can make internal and external calls via this number. A trunk key
can be programmed with a substitute function (with another team member
acting as the substitute). Calls for you are then signalled to the terminal of
another team member. A trunk key also provides functions for managing calls.
For example, you can configure call protection if you do not want to be dis-
turbed, or call diversion to another telephone.
■ Team key : As with a trunk key, a team key can be used to receive or make calls.
However, this key cannot be used to change the settings for managing calls; it
is not possible, for example, to configure call diversion to another telephone.
Calls made via a team key are signalled to all terminals with a trunk key that has
been programmed with the same number. For example, the team key with the
number 11 calls all trunk keys with the number 11.
■ Busy key: The purpose of a busy key is to make the busy status of other sub-
scribers visible. An incoming call for a busy team member is signalled on the
other team member's busy key. That team member can take this call by
pressing the busy key, which seizes his own terminal's trunk key. Calls taken via
the busy key are not entered in the call list of the team member who was origi-
nally called. In addition, it is possible to call the respective team member via his
busy key when his terminal is idle. You set up a call to this team member by
pressing your own trunk key.
■ Direct call key : Only outgoing calls can be made with a direct call key; they are
signalled to all terminals with the same number programmed to a trunk key.
Calls via a direct call key are signalled to the destination terminal even if that
terminal has been programmed with a substitution function or call protection.
Aastra 6775 (OpenPhone 75) and
Aastra 2775ip (OpenPhone 75 IPC) with
an additional key extension
Aastra M676 20 additional keys with a display
Up to three of these key extensions can
be used with an
Aastra 6775 (OpenPhone 75) and
Aastra 2775ip (OpenPhone 75 IPC).
Number of available call keys
Telephone Number of keys