Aastra OpenCom 100 series, Руководство по монтажу и пусконаладке

Страница: 87 / 256

Configuration
85
Note
You can download the latest version of the online help from http://www.aastra.de or
http://www.aastra.com.
Finishing the Configuration
1. When you have completed all the settings in the Configurator , you must save the
configuration (see also Saving and Loading the Configuration on page 85 ).
2. Then select the Log-off command in the upper menu bar.
Saving and Loading the Configuration
Configurations are saved in a file archive and can be loaded to the OpenCom 100
either locally from a connected configuration PC, or by remote configuration. The fol-
lowing configuration and customer data can be saved and loaded again:
• Telephony and network parameters
• User data
• Telephone book entries
• LCR tables
Note, that for security considerations the passwords for external SIP trunks are not re-
established if you restore a data backup from another (foreign) communication
system. For further information, refer to the online help documentation under the
topic
System: Data backup .
Preconfiguration
Configuration of the OpenCom 100 can be prepared at your Aastra Customer Service
Centre or by an authorised Aastra dealer. For this purpose, a OpenCom 100 installed
here is programmed with the customer data (e.g. user data, call distribution schemes,
cord-bound terminals). This data is stored and then loaded into the OpenCom 100 at
the customer’s site by a service technician.
This prepared configuration must be completed at the customer’s site (LAN configu-
ration and DECT terminals).
For configuration of the OpenCom 100 Internet functions, first ask the responsible
system administrator for details of the customer’s LAN prerequisites.