OpenCom 150 – OpenCom 150
OpenCom 150 Rack – OpenCom 150 Rack
OpenCom 130 – OpenCom 130
OpenCom 510 – OpenCom 510
Cascading Set: Scope of Delivery
Installation Notes
Open Com 130 – OpenCom 130: Earth Connection
OpenCom 100 Cascading
Short Installation Guide
Item No.: 41-001294-00
As of December 2008
© Aastra Telecom Schweiz AG • http://www.aastra.de
1-12 frame: master system
1-12 frame: slave system
PCM port of the central control module MC+1-3:
voice and administration data lead
PCM
PCM
C
Master system
LAN0 LAN1
PCM1 PCM2
Slave system
LAN0 LAN1
PCM1 PCM2
PCM1: voice data lead
LAN1: administration data lead
Note:
For the OpenCom 150
(wall version), the availablity
of the required ports depends
on the hardware version.
B
B
S2M/PRI
Slave system
PCM1
PCM2
LAN0
LAN1
S2M/PRI
Master system
PCM1: voice data lead
LAN1: administration data lead
PCM1
PCM2
LAN0
LAN1
B
B
Master system
Slave system
PCM1: voice data lead
LAN2: administration data lead
Connect earth to
both
PCM ports:
1.
Connect cable A to PCM ports.
2.
Connect earth (to each PCM port).
PCM
LAN1
LAN2
LAN0
LAN1
LAN2
LAN0
PCM
earth connection
required!
(see figure left)
A
B
Licence
Short installation
guide
length: 2 m, with
earth connection
length: 2 m
length: 0.5 m
4 CAT5 Ethernet STP patch cables:
Fastening set
for cable A:
2 screws,
2 lock washers
A
B
C
2x
PBX cascading may only be carried out by
qualified experts. Please also follow the
safety instructions in the OpenCom's
“Mounting and Commissioning” guide.
Caution!
Static charge can damage electronic
devices. Observe the regulations regarding
electrostatically sensitive components!
Danger! Dangerous voltage in device!
Disconnect master and slave system
from the mains supply!
With an OpenCom 510:
If a 1-12 frame is being powered by
two power supply units, pull
both
mains plugs out of the power socket!
Other valid documentation
This short installation guide is only valid with the “Mounting and Commissioning” guide which
is included, in the form of a PDF file, on the OpenCom 100 product CD. The latest version of the
“Mounting and Commissioning” guide is also available on the Aastra website. You can download
it from the password-protected partner area:
https://portal.aastra-detewe.de
.
For detailed information on PBX Cascading, please refer to the “PBX Cascading” chapter
in the “Mounting and Commissioning” guide.
Licence information
For the PBX Cascading you will need a licence.
The licence agreement (included in the cascading set's scope of delivery) provides you with
the necessary steps to activate this function.
Safety instructions
