background image

Services Reserved for Attendants

MD Evolution – Dialog 4223 Professional

140

This accumulation of charges here is iterated in the number of 

charges received from the public ISDN network, as well as the 

total cost, exclusively expressed in Euros.

You may then:

BLANK

Press the dynamic function key shown on the left.

You are prompted to confirm, and then the charge counter assigned 

to this extension is reset to zero.
Or,

PRINT

Press the dynamic function key shown on the left.

The report for the charge counter assigned to the extension is printed 

on a system printer connected to your telephone facility. As illus-

trated below, the printout provides the costs for the calls that are 

imputed to the involved extension, in two currencies – French Francs 

and Euros.

15 May – 5:35 p.m.

Printout of users’ charge counters.

Note:

The “E. CHARGE” service enables you to manage, 

in a similar manner, the charge counters that are processed 

in terms of public network access, instead of your facility’s 

extensions.

Major System Alarm Message Indication

On your attendant’s position, you may also receive an indication 

that there is a major alarm within your telephone system.

420  ROUSSET Jean-Luc
CHARGES =  85

COST =  8.50  EUR

BLANK

PRINT

RETURN

DN

TS

CHARGES

COST1

COST2

420

TELEPHONY

85

55.76 FF

8.50 EUR

Содержание DIALOG 4223 PROFESSIONAL






































































































































































Отзывы: