![Aastra Ascotel Office 45 Скачать руководство пользователя страница 33](http://html1.mh-extra.com/html/aastra/ascotel-office-45/ascotel-office-45_operating-instructions-manual_3310961033.webp)
Settings with the System Assistant
33
Password
Changing the System Assistant Password
Menu path: 9-Password
Lets you change the password for using the System Assistant.
Before making the change, you must enter the old password. The new password must have a minimum
of 8 and a maximum of 10 characters. During input the display shows only "*" to protect you against
unauthorized access. The password has to be repeated to exclude typing errors. Digits and letters are
possible; letters are case sensitive.
Other Settings
Under Other Settings you will find:
• Logging on cordless phones (also referred to as handsets or DECT)
• Authorizing different telephone network providers
• Setting up messages and announcements
Logging your Phone On
Menu path: 0-Other settings/1-Log DECT handset on/off/Phone number/1-Log on
The handset (also referred to as a DECT) has to be available for the logon procedure so that the logon
procedure can be activated. With GAP handsets the access code has to be entered prior to logon
(see below).
Logging your Phone Off
Menu path: 0-Other settings/1-Log DECT handset on/off/Phone number/2-Log off
To log off a handset (also referred to as a DECT), make sure the handset is switched on and within the
system's transmission range. The logoff procedure is then carried out at both ends, i.e. on the system and
on the handset, without needing to operate the handset.
Even if the logoff procedure is carried out only at one end, it will no longer be possible to telephone. If a
handset is logged off from the system only, the system range it has been using will remain occupied on
the phone, which means it will not be possible to log the phone back on within that system range.
This means that the handset can no longer be logged on if all 4 system ranges are occupied. In such cases
the occupied system ranges have to be logged off on the handset itself.
Changing the Access Code for GAP Handsets
Menu path: 0-Other settings/1-Log DECT handset on/off/Phone number/3-Change access code.