manualshive.com logo in svg

Aastra Ascotel IntelliGate 2025, Системное руководство, Страница: 81 / 111

Поделиться
Скачать
Aastra Ascotel IntelliGate 2025 Скачать руководство пользователя страница 81

Interfaces and Terminals as of I7.8

Terminals

81

sy

d-

023

9/2.

4 

– I7.

8

 – 0

7

.2009

3. 6. 1. 1

Office 10 

The terminal is a desktop model. A wall-mounted bracket is available as an option.

Installation of the desktop model

1.

Feed the connecting cable through the strain relief on the handset rest.

2.

Position the handset rest as required and put the handset in place.

Installation of the wall-mounted bracket (Option)

1.

Feed the connecting cable through the strain relief on the wall-mounted bracket.

2.

Screw the wall-mounted bracket onto the wall using the screws supplied and 
hook the handset into position.

Connection

1.

Set the AD2 bus address (

Fig. 39

).

2.

Plug the connector into the socket-outlet.

3.

If the system is configured, test the operation of the terminal.

4.

Label terminal.

Fig. 39

Set the AD2 bus address

Note:

Make sure the TSD (address switch) is pushed in as far as the stop or the 
switchover will not function correctly.

Power supply

The terminal is powered via the AD2 line.

TSD2

TSD1

haz1045aaena0

Содержание Ascotel IntelliGate 2025
















































































































Отзывы:

Нет отзывов