Ascotel® IntelliGate® 150/300 as of I7.9
208
Operation and Maintenance
sy
d-
021
0/1.
7
– I7.
9 – 1
2.
2009
The relevant TCP port has to be activated for data transmission.
The event types can be assigned different priorities in the SEM Configurator.
The SEM Configurator is also used to set, for each individual AIMS database, the
way in which the SEM Server should respond to each incoming event message (e.g.
send e-mail, print out on a printer).
If you want a beep or melody to signal that the SEM Server has received an event
message, make the appropriate setting in the SEM Configurator.
SEM Server
The SEM Server receives event messages from PBX systems and stores all the im-
portant data in the corresponding AIMS databases.
For the program to operate correctly, there has to be at least one AIMS database.
SEM Viewer
The SEM Viewer is used to edit the event messages stored by the SEM Server; they
can then be filtered, sorted, printed or written into a file according to, for example ,
status, customer, PBX or priority.
The SEM Viewer can also be used to set, for each AIMS database, the way in which
the SEM Server should respond to an event message (e.g. send e-mail, print out on
a printer).
6. 6. 3
Operating state and error displays
Operating state
During the start-up phase, various self-tests are performed and the individual
phases are shown in the LED display on the front panel (see
).
When operation is OK, the SYS LED flashes green, regularly, and once per second in
the display on the front panel. The system is in normal mode. The assignment of in-
ternal or external ports, password-free access as well as remote access via an exter-
nal dial-up connection to AIN are shown as status in the LED display (see
and
