Model
9133i
SIP Admin Guide
2
Methods of Installation
Methods of Installation
The firmware set up and installation
for the 9133i can be done through
the Options List available directly
from the phone or through the
Aastra 9133i Web Client
web
interface. When the 9133i is
initialized for the first time, DHCP
is enabled by default. The DHCP
server passes information to the
9133i IP Phone so that it can
configure itself for subsequent IP
PBX addresses and normal runtime
operations.
The following considerations must
be made before connecting the 9133i
IP Phone to the network:
• If you are planning on using
Dynamic IP addresses, make sure
a DHCP server is running on
your network.
• If you are not planning on using
Dynamic IP addresses, refer to
“Manually Configure Network
Settings” on page 6
on how to
set up an IP address manually.
• Make sure a TFTP server is set up
on your network and can accept
connections anonymously.
• Every PBX system that interacts
with the 9133i phones requires
adherence to the SIP Standard.
To find out how to hook up the
cabling to your 9133i phone, please
refer to the
Aastra
9133i
Installation
Guide
.
