10
Making and Answering Calls
Setting the date and time
If you subscribe to the Caller ID service from your telephone company, the date and
time are set automatically after you receive your first incoming call. If you do not sub-
scribe, you must set the date and time manually.
To resume the automatic date and time setting (if the date and time has been set man-
ually), disconnect the power supply (or the line cord if the phone is PBX powered),
then re-connect it. After your first incoming call, the date and time are automatically
set if you subscribe to the Caller ID service from your telephone company.
Adjusting the Handset and Speaker volume
Press the left or right side of the volume bar
R
to adjust the volume on the
handset or speaker. The speaker volume remains at the level selected until the next
time you change it.
Adjusting the Ringer Volume
The ringer volume is controlled by a three position switch on the back of the Model
9116LP. The ringer volume can be set to be off, low or high.
Adjusting the Display Contrast
The contrast on the display screen can be adjusted as required to compensate for light-
ing conditions.
Set Indicator Light
The set indicator light, located on the top right hand corner of the Model 9116LP,
flashes and illuminates to provide information as follows:
* You must subscribe to Voice Mail features from your telephone company for this feature to work.
To set the date and time:
1.
Press
I
.
2.
Press
W
or
V
until display indicates
Set Time/Date
.
3.
Press
K
. Display shows time and date. Use
W
and
V
to adjust the flashing
time and date and
T
U
to move to the next field. To change the AM/PM indi-
cator, adjust the time ahead by 12 hours.
4.
Press
K
.
To adjust the display contrast:
1.
Press
I
.
2.
Press
W
or
V
until screen displays
Set Contrast
.
3.
Press
K
. Display shows
123456
. Use
T
and
U
to move the flashing line to
adjust the contrast to the desired level.
4.
Press
K
.
Set indicator light is on.
Extension phone is in use.
Set indicator light flashes very quickly.
Incoming call.
Set indicator light flashes quickly.
Line is on hold.
Set indicator light double flashes.
Message Waiting*.
