background image

9112i IP Phone User Guide

19

Handling Calls

Handling Calls

When you are connected to a call, 
you can use the hard keys on the 
phone to place a call on hold, 
transfer a call, or conference. 

The Swap Key 

While you’re on the phone, if there 
is a second incoming call, pressing 

o

 places the current call on 

hold and answers the incoming 
call. Pressing 

o

 again toggles 

between the two active calls. A 
third call cannot be accepted. 
While in a call with no other 
incoming calls, pressing 

o

 

has no effect. 

o

 can be used 

to switch back and forth between 2 
calls.  

To handle two calls:

• Press 

o

 to answer a 

second incoming call. Your first 
call is automatically put on hold.

• You can use 

o

 to juggle 

between the two calls. 

• To transfer a call to another line, 

press 

o

 to answer, then 

k

 to transfer the call, 

followed by the extension or 
outside line number. See the 
section 19 for more information.

• If you or the other party hang up 

on an active call while a second 
call is on hold, the phone 
remains in the standard hold 
state.

Placing a Call on Hold

When you place a call on hold, 
only your phone can retrieve the 
call. 

To place a call on hold: 

1. Connect to the call (if not 

already connected). 

2. Press the Hold 

O

 key. 

Your telephone set indicator light 
in the upper right corner of your 
phone will flash steadily to remind 
you that you still have a call on 
hold. The screen will display "

Call 

Held

". Press 

O

 again to 

reconnect to the held call.

When on Hold

To let your caller know that they 
are still on hold, music plays softly 
(if this has been set up for your 
system).

Automatic Hold

When juggling between calls, you 
do not have to press the hold 
button to go from one call to the 
next. The phone will automatically 
put your current call on hold as 
soon as you press 

o

. Use 

o

 to toggle back and forth 

between held calls.

IP Phone UI

IP Phone UI

   

 

 

Содержание 9112I



















































Отзывы: