Aastra 480I CT, Руководство пользователя

Страница: 19 / 69

/
IP Phone User Guide
13
Ma
king Call
s from 48
0i CT Base
Station
To Make and Receive Calls Using a
Headset:
1. Ensure that you have selected a
headset audio mode by
accessing the Options menu.
2.Plug the headset into the jack.
3.Press the
d
/
f
key to obtain a
dial tone or to answer an
incoming call. Depending on the
audio mode selected from the
Options menu, a dial tone or an
incoming call will be received on
either the headset or the
handsfree speakerphone.
4.Press the
N
to end the call.
Intercom
On the 480i CT base, the
]
key functions to access the cordless
intercom feature. This feature
allows the base to talk to any
registered cordless handsets.
Using the Aastra Web UI, you can
also enable (turn ON) or disable
(turn OFF) the microphone or
automatic answering (auto-
answer) on the IP phone for
incoming intercom calls. If auto-
answer is enabled on the IP phone,
the phone plays a tone to alert the
user before answering the
intercom call. If auto-answer is
disabled, the phone rejects the
incoming intercom call and sends a
busy signal to the caller. By
default, the microphone is OFF and
auto-answer is ON.
Note: Your system administrator can
configure outgoing Intercom
calls using the Icom button. Con-
tact your system administrator
for more information.
Refer to the following procedure
for using the Intercom feature.
1. Press the
]
.
2.Enter the extension number of
the person you wish to intercom
or the
BLF
softkey for that
extension.
3.After a beep tone, your phone
will automatically connect with
the remote extension and you
can speak through its speaker.
4.To cancel intercom, press
b
or the
Cancel
softkey.
5.When you are finished speaking,
hang up the phone by placing
the handset back on-hook or by
pressing
N
or the line/call
appearance button for the
active call. When you hang up,
the remote phone will also hang
up.
Redial
Press
v
to automatically
dial the most recent number you
dialed from the phone.
The Redial list contains 100 items.
While on-hook, pressing the
v
hard key will invoke the
Redial list. While off-hook, the
v
key functions as a "hot
redial" where the last number
dialed is dialed again.
Note: Your system administrator can
set your redial key to speedial a
specific number. Contact your
system administrator for more
information.
IP Phone UI