Copyright © 2015 AAS Technology
AH-11K
www.AAS.com.tw
3
R201605-V12
1CH Power & HD Video UTP Receiver
Model
VPH-100T
Function
Channels
1 CH (Video + Camera Power)
Transmission Distance
0~300m / 0~1000ft
Video & Connectors Properties
Video Connector
BNC-M
UTP Connector
RJ45
Compatibility
HD TVI, HD CVI, AHD, CVBS Video
Signal Transmitting Band
0~70MHz
Interference Rejection
>60dB
Power
Power Connector
2.1mm / 5.5mm DC Jack
UTP Cable Connector
RJ45
Voltage Range
12V ~36V DC
Maximum Current
1A
Protection
ESD
Contact Discharge: 6KV Air Discharge: 8KV
per: IEC61000-4-2
Surge
2KV (differential-mode), 4KV (common-mode)
per: IEC61000-4-5
Environmental
Operation Temperature
0°C~55°C / 32°F~131°F
Storage Temperature
-40°C~85°C / -40°F~185°F
Relative Humidity
0~95% (non-condensing)
Physical Properties
Color
Black
Material
ABS Engineering Plastic
Size
65 x 36 x 23mm / 2.56 x 1.42 x 0.91 inches
Cable Length: 60mm / 2.36 inches
*Specifications are subject to change without notice
Table-1**:
Voltage Drop According to Transmission Distance
Transmission Distance (L)
Transmission Voltage
(Output 12V DC /0.3A)
Transmission Voltage
(Output 12V DC/0.5A)
Transmission Voltage
(Output 12V DC/1A)
50m
13V
13.7V
15.5V
100m
14V
15.5V
18.7V
150m
15V
17V
22V
200m
16V
16.7V
25.5V
250m
17V
20.5V
28.7V
300m
18V
22V
32V
Table-2
**
:
Single Source
HD TVI
(720P/1080P)
HD CVI
(720P)
HD CVI
(1080P)
AHD-L/M
(720P/960P)
AHD-H
(1080P)
Analog Video
Recommended
Distance
150m / 380ft
200m / 500ft
100m / 250ft
300m / 950ft
150m / 380ft
300m / 950ft
**The test data in Table 1 and Table 2 are required under lab environment. In actual case, there may be some differences due to different cable and environment.
Troubleshooting
..
If the equipment fails, follow the methods below to troubleshoot.
•
Make sure equipment installation is according to the manual.
•
Check if all connections are correct and if RJ45 is conformed
with IA/TIA568A or 568B.
•
Maximum transmission distance depends on the quality of
the signal source and the transmission cable. Do not exceed
the equipment maximum transmission distance.
•
If yellow LED for RJ45 is lite on individual channel, cut off
power supply and unplug cable to check whether short circuit
or power consumption overload.
•
Check whether connection is correct. Charge the device when
there is no image.
•
Replace device to see if failed device is defective.
1 2 3 4 5 6
Pair 3
Pair 1
Pair 2
Pair 4
TIA/EIA 568B
Pin
Pair
Color
Orange
/ White
Orange
Green
/ White
Blue
Blue
/ White
Green
Brown
/ White
Brown
