4
Application Diagram
..
Hardware Installation
..
1.
HDMI source device (computer graphics card, DVD, PS3, HD monitoring equipment etc.
2.
HDMI display device like SDTV, HDTV, and projector with HDMI port.
3.
UTP / STP cat6 / cat6A / cat7 cable.
4.
Follow standard IEEE-568B.
5.
Transmit length more than 60m/200ft by CAT6 cable or higher level cable.
Connection Instructions
..
1.
Connect TX HDMI input with source device HDMI output. Connect TX HDMI output with
HDTV HDMI input.
2.
Connect TX CAT6 with RX CAT6.
3.
Connect RX HDMI output with HDTV HDMI input.
4.
Power on the device.
FAQ
..
Q: Is it normal to have no image output or audio and video display?
A: 1) Adjust RX “RESET” button to reset the device.
2) Try a shorter network cable to reconnect.
Q: Why is the RX “LINK” LED flashing all the time?
A: 1) Make sure the network cable connection follows the standard IEEE- 568B.
2) Check whether TX has the HDMI signal input.
3) Reset TX&RX and reconnect.
Q: The RX “LINK” LED light is on all the time but there is no image output.
A: 1) Press RX “RESET” button to reset the device.
2) Make sure HDMI cable is well connected with the TV.
3) Make sure the network cable is fine copper wires.
