AAS POE-0401-60, Руководство пользователя

Страница: 4 / 8

4
Hardware Installation ..
1. Please turn off the signal power and display device power before installation.
Installation with power will damage the transmission equipment.
2. Use network cable to connect PoE IP camera and 1~4 down link ports of product
respectively.
3. Use a network cable to connect equipment uplink port and NVR or computer.
4. Turn on equipment power.
5. Check if the installation is correct, if equipment is in good condition, if connection is
stable, and then provide power for the system.
6. Ensure the Ethernet equipment has appropriate power voltage and that it is working
properly.
Technical Specifications ..
Model POE-0401-60
Power Supply Power Adapter Input
Voltage Range 48V~57V DC
Power Consumption Equipment <5W ; PoE Output <60W
Ethernet Port Speed
1~4 Ethernet Port: 10/100Mbps
Uplink Port: 10/100Mbps
Transmission Distance
Down Link: Up to 100m / 300ft
Uplink Port: Up to 100m / 300ft
Ethernet Standard
Supports IEEE802.3 / 802.3u / 802.3x / 802.1p / 802.1q /
IEEE802.3 af/at
Network Backpane Bandwidth 1G
Network Packet Forwarding
Rate
0.75 Mbps
Network Packet Buffer 768k
MAC 2k
LED Status Indicator
Power 1pc (red)
Ethernet Port (yellow = PoE ; green = Act/link)
Surveillance module 1pc (green = start surveillance module)
Pulse Group Protection Level 2 ; Standard IEC61000-4-4
ESD Protection
1a Contact Discharge Level 2
1b Air Discharge Level 2
Standard: IEC61000-4-2
Anti-Thunder Protection Level 2 ; Standard: IEC61000-4-5
MTBF > 50,000h
Working Temperature 0°C ~ 55°C / 32°F ~ 131°F
Storage Temperature -40°C ~ 85°C / -40°F ~ 185°F
Humidity (non-condensing) 0~95%
Material & Color
Galvanized Sheet Black
Dimensions (L x W x H) 135 x 103 x 27 mm / 5.31 x 4.06 x 1.06 inches
Net Weight 315g / 0.69 lbs
*Specifications are subject to change without notice