Page 6 American Access Systems / Security Brands, Inc.
MOUNTING BRACKET
BRASS NUT
PROGRAM CARTRIDGE
CARD READER MODULE
inStrUctionS
remove the brass screws and slip the reader module from mounting bracket
Place the program cartridge between the reader module and the mounting
brackets and reassemble the unit
SPeciFicationS
• Power requirement:
none unless night light is desired
• Switching capacity:
5 amp 250 Vac or 5 amp 26 Vdc
• Switching logic:
normally open
• ambient temperature:
Up to 180 degree F (82 c)
• humidity:
non condensing - 35% maximum
• note:
Warranty void if actual card reader
module is disassembled
