Aarrow Becton 7 MK 3, Руководство по эксплуатации и установке

Страница: 8 / 32

ARRANGING THE COALS
Safety Notice - Please see SAFETY NOTICES
ref. Coal set page 4.
Warning: The coals and the coal matrices are
fragile ensure they are handled carefully.
Ensure location is correct. Do not force the
matrix into position. If the coals and/or the coal
matrices are damaged they must be replaced
with genuine Aarrow replacement sets.
Warning: An incorrect coal layout may cause
soot to build up inside the fire and therefore
invalidate the guarantee.
Ensure the appliance is cold.
Step 1 Place the base matrix on the matrix plate
centrally between the end tabs of the location bar.
(Fig 4a)
Fig 4a
Step 2 Place the rear matrix cut out section over
the base matrix and centralise the assembly
between the end tabs of the location bar. Ensure the
rear matrix is pushed back against the location bar.
(Fig 4b)
Fig 4b
Step 3 Becton 7 only . Locate 2 off end coals each
side of the base matrix. (See underside of coals for
hand identification) (Fig 4c).
Fig 4c
8 Becton Bunny & Becton 7 mk3 Gas stoves
OPERATING INSTRUCTIONS