Aardenburg Machinery BV.
ALPHA BETA M (door)
22
8.0 Safety work conditions
8.2.1
CONNECTION BETWEEN TRACTOR AND OPERATING MACHINE
A common cause of injury regards procedures for hooking-up and releasing the machine from the tractor. Injuries
are mainly caused by crushing or torn or injured muscles caused by exerting excess forces.
It is necessary for:
- all adjustments to be done with the machine on the level,
the PTO disengaged and with the tractor braked and off;
- always make sure the machine is securely blocked and positioned in place
when it is disconnected: this will prevent accidental movements or tipping over
which can have serious consequences for persons or property in the vicinity
of the machine;
- the tractor operator and the ground-level operator must coordinate their
connection and release procedures;
- it is best to employ quick-connection systems or use a specific connection jack.
8.2.2
PROTECTION OF MOVING DRIVE PARTS
Injuries caused by being caught and pulled by moving drive parts are often very severe. They are caused both by
inefficient protection due to broken or worn safety devices or by wearing unsuitable garments.
It is necessary for the P.T.O., cardan shaft, and all moving parts:
-
to check the presence and condition of all safety guards and devices;
-
to replace worn and/or broken safety devices;
-
to avoid working in the vicinity of moving parts;
-
to turn the tractor engine off before working on the transmission and the machine;
-
to always prevent children or extraneous persons from approaching the machine when it is at work;
-
to wear suitable close-fitting garments;
