Aardenburg Machinery BV.
ALPHA BETA M (door)
7
3.0 Machine model and basic components
3.2 FUNCTIONAL CHARACTERISTICS OF THE MACHINE
The machine can work behind the tractor or on the side of the tractor, mowing the banks of ditches inclined
upwards or downwards. The following illustration and table indicate the machine’s range of action
3.3 STANDARD TOOLS
Original tools are the results of in-depth research and lengthy experience. They are made out of high quality
steel and parts subject to thermal treatments are extremely tough and wear-resistant. Weights and dimensions
are rigorously monitored and the rotor does not required to be newly dynamically balanced in case of partial or
total tool replacement.
Tools that are broken or excessively worn can cause the machine to vibrate. In this case you must immediately
stop working and start working again only after replacing the tools.
If the machine still vibrates after the tools are replaced then the rotor must be dynamically balanced.
The high strength 10.9 (UNI 3740) fastening screw guarantees a sure connection and duration that corresponds
to the duration of the tools.
WARNING:
INSTALL ONLY ORIGINAL TOOLS ON THE ROTOR!!
TYPES OF TOOLS
Mod.
A
B
C
D
E
(cm)
(cm)
(cm)
(cm)
(cm)
BETA M 1050
105
130
106
155
85
BETA M 1250
125
130
96
180
105
BETA M 1450
145
130
86
205
125
BETA M 1650
165
130
76
220
145
BETA M 1850
185
130
66
235
165
