Aardee ARDI-82, Руководство пользователя

Страница: 6 / 8

How to use the iron

Classify the garments accordingly.

Position the iron vertically then plug in the power cord to the wall socket.
 Select the right fabric setting. Once the light goes off then you can begin ironing the
garments.
Troubleshooting
Please refer to the table below for common queries on this unit as it may save you time and
money. If your concern is not found on the list or your issue persists, then kindly call our service
centre.
Problem Possible causes Solutions
Water drips
from the
sole plate
 The chosen temperature is too low
thus the formation of steam is not
allowed.
 Too much usage of burst of steam
button.

Iron is in an upright position
without emptying the remaining
water.
 Make sure the temperature
control is set to any steam
position.
 Lessen the steam flow.
 In using the button for steam of
burst, give few seconds as time
interval.
Iron stains
the
garments

The garment might not be rinsed
properly.
 You have sprayed the garments using
another liquid aside from tap water.

Clean the sole plate of the iron by
using a non-metallic sponge.
 Make sure the garments are
thoroughly washed.
Sole plate is
damaged

Iron was placed on a metal
surface.

Always put iron in an upright
position.
Cleaning & Maintenance
Turn off the iron and unplug the power cord from the power outlet after using it.
Drain the extra water inside the water tank of the iron.
Cool off the iron before storing it. Always make sure it is in an upright position to avoid scratches.
To clean the residue, use a damp cloth then afterwards a dry cloth.
3
4