AAQ AutoLift AL-167262, Руководство по установке и инструкции по эксплуатации

Страница: 26 / 29

SAFETY OPERATING PROCEDURES
Vehicle Hoist
DO NOT use this machine unless you have been instructed
in its safe use and operation and have been given permission
PERSONAL PROTECTIVE EQUIPMENT
Safety glasses must be worn at
all times in work areas. Long and loose hair must be
contained. Do not stand on hoist whilst
hoist is in operation.
Sturdy footwear must be worn
at all times in work areas. Close fitting/protective
clothing must be worn. Rings and jewellery must not
be worn.
PRE-OPERATIONAL SAFETY CHECKS

Locate and ensure you are familiar with all machine
operations and controls.

Ensure all guards are fitted, secure and functional. Do
not operate if guards are missing or faulty.

Ensure the vehicle hoist has operating and maintenance
instructions permanently located and clearly visible.

Check the capacity of the hoist compared to the weight
of the vehicle. If vehicle is too heavy, do not proceed.

Ensure the area is clean and clear of grease, oil.

Check workspaces and walkways to ensure no slip/trip
hazards are present.

Check that all safety devices are in good condition.

Ensure support arms are capable of being locked in
position.

Ensure rubber pads are in good condition on all load
points.
OPERATIONAL SAFETY CHECKS

Centre the vehicle on the hoist, ensuring the weight is
evenly distributed to the front and rear.

Identify the correct jacking points and place the lifting
pads under the vehicle at the front and rear on the
jacking points, ensuring contact.

Only one person shall operate the hoist at a time.

The hoist must not be operated unless it has a current
certificate of inspection.

Ensure the area is clear of people and equipment before
operating.

Check vehicle stability by looking at the jacking points.

Engage manual lock.
ENDING OPERATIONS AND CLEANING UP

Lower the vehicle hoist and switch off machine when
work completed.

Leave the equipment and work area in a safe, clean and
tidy state.
POTENTIAL HAZARDS AND INJURIES

Falling objects.

Trapping hazards.

Crushing hazards.

Hair/clothing getting caught in moving machine parts.
DON’T

Do not use faulty equipment. Immediately report
suspect equipment.

Never leave the machine running unattended.
This SWP does not necessarily cover all possible hazards
associated with this equipment and should be used in
conjunction with other references. It is designed as a guide to
be used to compliment training and as a reminder to users
prior to equipment use.