AAQ AutoLift AL-167251, Руководство по установке и инструкции по эксплуатации

Страница: 6 / 31

3.1.1 Tools and equipments needed

Appropriate lifting equipment

Anti-abrasion hydraulic oil.

Rotary Hammer Drill with 3/4’’ drill bit.

Chalk and tape measure, magnetic plump, 8 metersФ15 level pipe.

Sockets and open wrenches, a set of inside hex wrenches, cross and straight screw drivers.

Hammer, 4pounds, sharp nose pliers, Ф17,Ф19,Ф22 socket spanners
。
3.1.2 List for parts checking ---Annex 1
（
Packing list
）
Unfold the package and check if any parts missed as per Annex 1. Do not hesitate to contact us in case any parts missed, but if you
do not contact us and insist installing upon the lack of some parts, EverLift as well as our dealers will not bear any responsibility for
this and will charge for any parts subsequently demanded by the buyer.
3.1.3 Ground conditions
The hoist should be used on a smooth and solid concrete ground with its strength more than 3000psi, tolerance of flatness less than
5mm and minimum thickness of 200mm. In addition, newly built concrete ground must undergo more than 28days’ cure and
reinforcement.
3.2 Precautions for installation
3.2.1 Make sure post stand vertical to the ground. No slanting.
3.2.2 Connections of oil hose and steel cable must be firm in order to avoid the looseness of steel cable and leakage of oil hose.
3.2.3 All bolts should be firmly screwed up.
3.2.4 Do not place any vehicle on the
hoist in the case of trial running.
3.3 Installation
Step 1: Remove the packaging, take out the carton for accessories.
Step 2: Fix drive-on ramp with the base frame.
Step 3: Move the lifting arms and control box out from the post.
Suspend the post by lifting equipment and then dismantle the post from its packing frame
Attention
：
Please pay special attention not to let the post fall down for it may cause casualty or bring damages to the accessories
fixed in the post.
Step 4: Fix the post onto to the base frame and the portable kit connector
INSTALLATION INSCRUCTIONS
3.1 Preparations before installation