AAON PREHEAT-X Скачать руководство пользователя страница 2

Страница: 2 / 28

PREHEAT-X Technical Guide

PREHEAT-X REVISION LOG

REVISION AND DATE

CHANGE

Rev. E, April 16, 2021

Updated part numbers, alarms and alarm history, and labels. Added Figure/Table

content pages, and Fahrenheit/Celsius temperature conversion. Corrected cosmetic

errors.

AAON

2425 South Yukon Ave.

Tulsa, OK 74107-2728

www.aaon.com

Factory Technical Support Phone: 918-382-6450

AAON Controls Support: 866-918-1100

It is the intent of AAON to provide accurate and current

product information. However, in the interest of product

improvement, AAON reserves the right to change pricing,

specifications, and/or design of its product without notice,

obligation, or liability.

AAON P/N: G086640, Rev. E

the world.

AAON

is a registered trademark of AAON, Inc., Tulsa, OK.

AAON assumes no responsibility for errors or omissions in

this document.

This document is subject to change without notice.

www.aaon.com

PREHEAT-X PARTS REFERENCE

PART DESCRIPTION

PART NUMBER

PREHEAT-X Module

ASM01688

VCCX2 Controller

ASM01698

VCB-X Controller

ASM01862

VCM-X E-BUS Controller

V07151

Air Temperature Sensor

G051240 (6 in.), G051250 (12 in.)

Outside Air Sensor

G042230

EBC E-BUS Cable Assembly E-BUS Power & Comm 1.5 Ft, 3 Ft,

10 Ft, 25 Ft, 50 Ft, 75 Ft, 100 Ft, 150 Ft, 250 Ft, and 1000 Foot

Spool

G029440 (1.5 Ft), G012870 (3 Ft), G029460 (10 Ft), G045270 (25 Ft),

G029510 (50 Ft), G029530 (75 Ft), G029450 (100 Ft), G029470 (150 Ft),

V36590 (250 Ft), G018870 (SPOOL)

All manuals are also available for download from

www.aaon.com/controlsmanuals.

Содержание PREHEAT-X





























Результаты поиска

Содержание PREHEAT-X

Отзывы:

Бренды по названию

Популярные бренды

AAON PREHEAT-X, Техническое руководство

Результаты поиска

Содержание PREHEAT-X

Отзывы:

Бренды по названию

Популярные бренды